Qualwood™ Hidden Hangers
Qualwood Hidden Hangers hang on a small nail or even a
pin. They have a Velcro strip that clings to many rugs and other fabrics
such as felt. If your wall hanging is made from a
material that does not stick to Velcro you just need to add a small piece of
felt for each hanger.
The felt can be sewed on or attached with pins. The
felt included with the kit also has an adhesive backing. To attach the felt
with the adhesive:
1. Cut a piece for each hanger
2. Peel off the paper backing
3. Place it adhesive side down
where you want to locate the hanger.
4. Iron it on for 30 - 45 seconds
on the wool setting.
Note: Once attached with the iron the felt can not be
removed. But, the adhesive may not stick to material that has not been
washed. If it does not stick, or you do not want to use adhesive, just
attach the felt with pins.
Now locate the hangers on the wall. The hole on the
back of the hanger will slip onto a small nail. Be sure they are the
correct distance apart.
Then to hang your quilt or rug, just press it against the
hangers. Be sure the felt patches contact the Velcro.
